- 8 minutes to read

Release Notes

Configuring the IBM DataPower Gateway Monitoring Agent

Master your IBM DataPower infrastructure monitoring with the Nodinite DataPower Monitoring Agent. This guide walks you through comprehensive SNMP configuration, threshold tuning, and notification setup for proactive monitoring of your DataPower Gateway instances.

✅ Centralized SNMP configuration for all DataPower instances
✅ Real-time monitoring of disk, CPU, memory, and services
✅ Flexible notification rules with customizable thresholds
✅ Support for SNMPv2 and SNMPv3 with security options
✅ Remote configuration and management from the Web Client

Info

This guide provides instructions for configuring the Nodinite IBM DataPower Gateway Monitoring Agent.

Note

The Monitoring and remote configuration features are available only after you install the DataPower Monitoring Agent and create the initial Monitoring Agent Configuration for the DataPower Monitoring Agent. First-time users should review the Prerequisites.

Remote Configuration

As a Nodinite Administrator, navigate to Administration > Monitor Management > Monitor Agents, select your DataPower Monitoring Agent, and click the 'Configuration' button to open the remote configuration modal.

Remote Configuration Modal
Example of the Remote Configuration modal for the DataPower Monitoring Agent.

The remote configuration interface consists of two primary tabs:

  • Data Power SNMP - Configure DataPower instances and monitoring settings
  • Settings - Global agent settings for environment, debug, and culture

Data Power SNMP Tab

The Data Power SNMP tab is the primary interface for adding and configuring DataPower Gateway instances to monitor.

DataPower SNMP Tab
Example of the DataPower SNMP tab showing the Add button and instance list.

Add DataPower Instance

Click the Add button to add a new DataPower Gateway instance to monitor. You can configure as many instances as needed, and each will appear as an expandable accordion entry in the list.

Empty Accordion Entry
Example of a collapsed accordion for a DataPower instance. Click to expand and configure.

Expand the accordion to access the configuration tabs. Click the red button in the accordion header to remove an instance from monitoring.

Configuration Tabs
Example of the six configuration tabs available for each DataPower instance.

Each DataPower instance has six configuration tabs:

  • Connection - SNMP connection settings and security
  • Disk - Disk usage thresholds
  • CPU - CPU load thresholds
  • Memory - Memory usage thresholds
  • Services - Service-specific monitoring and thresholds
  • Notification Rules - Conditional notification triggers

Connection Tab

The Connection tab configures SNMP communication settings for connecting to your DataPower Gateway instance.

Connection Tab - Top
Example of the Connection tab showing essential SNMP settings.

Essential Connection Settings

Display name
A user-friendly name for this DataPower instance as it appears in Monitor Views and Resources. Use descriptive names like "Production Gateway 1" or "DMZ DataPower East".

SNMP Trap Port
The local port on the Monitoring Agent host for receiving SNMP trap messages from DataPower. Default is 162.

Server
The IP address or hostname of your DataPower Gateway instance (e.g., 192.168.1.100 or datapower.company.com).

Port
The SNMP port on the DataPower instance. Default is 161.

SNMP Version
Select the SNMP version configured on your DataPower instance:

  • v2 - SNMPv2c (community-based)
  • v3 - SNMPv3 (user-based security with encryption)

SNMP Version
Example of the SNMP Version dropdown showing v2 and v3 options.

SNMPv3 Security Settings

If using SNMPv3, additional security settings are required:

Connection Tab - Bottom
Example of SNMPv3 security settings in the Connection tab.

Security Name
The SNMPv3 username configured on your DataPower instance.

Security Level
Select the security level matching your DataPower configuration:

  • noAuthNoPriv - No authentication, no encryption
  • authNoPriv - Authentication, no encryption
  • authPriv - Authentication and encryption

Context Name
The SNMP context name for your DataPower instance. Leave empty if not using contexts.

Context Engine ID
The SNMP Engine ID for your DataPower instance. You can find this in the DataPower administration console under Status > Other Network > SNMP Status.

Tip

To find your DataPower SNMP Engine ID, navigate to the DataPower administration console and check Status > Other Network > SNMP Status. The SNMPv3 engineID will be displayed as shown below.

DataPower SNMPv3 Engine ID
Example of the SNMP Status page in DataPower showing the SNMPv3 engineID.

Warning

When entering the Context Engine ID, remove the 0x prefix from the value shown in DataPower. For example, if DataPower shows 0x8000395d030242ac110002, enter only 8000395d030242ac110002 in the Nodinite configuration.

Disk Tab

The Disk tab configures load warning and error thresholds for disk usage monitoring on your DataPower instance.

Disk Tab
Example of the Disk tab with load threshold settings.

Load Warning Threshold %
The disk usage percentage that triggers a Warning state in Monitor Views. When disk usage exceeds this threshold, the resource will be highlighted as a warning. Default is 80%.

Load Error Threshold %
The disk usage percentage that triggers an Error state in Monitor Views. When disk usage exceeds this threshold, the resource will be marked as critical. Default is 90%.

Tip

Set warning thresholds lower than error thresholds to provide early alerts before critical situations occur. For example, set Warning at 80% and Error at 90% to give your team time to respond.

CPU Tab

The CPU tab configures load warning and error thresholds for CPU usage monitoring.

CPU Tab
Example of the CPU tab with load threshold settings.

Load Warning Threshold %
The CPU usage percentage that triggers a Warning state. Default is 80%.

Load Error Threshold %
The CPU usage percentage that triggers an Error state. Default is 90%.

Memory Tab

The Memory tab configures load warning and error thresholds for memory usage monitoring.

Memory Tab
Example of the Memory tab with load threshold settings.

Load Warning Threshold %
The memory usage percentage that triggers a Warning state. Default is 80%.

Load Error Threshold %
The memory usage percentage that triggers an Error state. Default is 90%.

Services Tab

The Services tab allows you to monitor specific DataPower services with custom thresholds based on domain, event codes, configuration state, administrative state, and operational state.

Services Tab
Example of the Services Tab with the Add button for service-specific monitoring.

Click the Add button to create a service-specific monitoring configuration.

Specific Service - Empty Accordion
Example of a new service entry before configuration.

Expand the accordion to configure the service monitoring details.

Specific Service - Top
Example of essential service settings including Service Name, Domain, Event Code, and Config State.

Service Name
A descriptive name for this service monitoring rule.

Domain Operator
Select the comparison operator for domain matching:

Domain Operator
Example of Domain Operator dropdown options.

Event Code Operator
Select the comparison operator for event code matching:

Event Code Operator
Example of Event Code Operator dropdown options.

Config State Operator
Select the comparison operator for configuration state matching:

Config State Operator
Example of Config State Operator dropdown options.

Config State Options
Select the configuration state value to monitor:

Config State Options
Example of Config State Options dropdown.

Scroll down to configure additional service state parameters:

Specific Service - Bottom
Example of advanced service settings including Admin State and Operational State.

Admin State Operator
Select the comparison operator for administrative state matching:

Admin State Operator
Example of Admin State Operator dropdown options.

Op State Options
Select the operational state value to monitor:

Op State Options
Example of Operational State Options dropdown.

Notification Rules Tab

The Notification Rules tab configures conditional notifications based on DataPower events, states, and thresholds. This allows you to create targeted alerts for specific scenarios.

Notification Rules Tab
Example of the Notification Rules tab with the Add button.

Click the Add button to create a new notification rule.

New Notification Rule Entry
Example of a new notification rule entry before configuration.

Expand the accordion to configure the notification rule conditions.

Notification Rule - Top
Example of notification rule essential settings including domain, event code, and state operators.

Configure the same condition operators as in the Services tab (Domain, Event Code, Config State, Admin State, Op State).

Notification Rule - Bottom
Example of notification rule advanced settings and notification level.

Minimum Severity
Select the minimum severity level that will trigger this notification rule:

Notification Rule Minimum Severity
Example of the Minimum Severity dropdown showing severity levels.

Notification rules allow you to create sophisticated alerting logic, such as:

  • Notify when a specific domain enters a down state
  • Alert when CPU exceeds 90% on production gateways
  • Trigger escalation for critical service failures

Settings Tab

The Settings tab provides global configuration options for the DataPower Monitoring Agent.

Settings Tab
Example of the Settings tab showing environment, debug, and culture options.

Environment

Set the target Environment name for all DataPower instances monitored by this agent. This label appears in Monitor Views and helps distinguish between TEST, QA, and PROD environments.

Debug

Enable the Debug checkbox to activate detailed file logging for troubleshooting. This creates verbose log files in the agent installation directory. Default is unchecked.

Warning

Debug logging can generate large log files and impact performance. Enable only when troubleshooting issues, and disable after resolving problems.

Culture Information

The Culture Information setting determines how dates and times are formatted in Monitor Views when displaying DataPower Resources. Select your preferred culture format (e.g., en-US, sv-SE).

Save and Apply Changes

After configuring your DataPower instances and settings, you must save your changes for them to take effect.

Save and Close buttons
Example of the Save and Save and close buttons.

Save and close
Saves all configuration changes and closes the remote configuration dialog. Changes will be applied on the next agent synchronization cycle.

Save
Saves all configuration changes and keeps the dialog open for further edits.

Cancel
Closes the dialog without saving any changes made since the last save.

Tip

After saving configuration changes, the agent will apply the new settings on its next synchronization cycle based on the polling interval configured in the Monitoring Agent Configuration.

Next Step

Learn about monitoring DataPower instances

Managing DataPower Gateway
DataPower Gateway Overview
Install DataPower Monitoring Agent
Prerequisites for DataPower Monitoring
Monitor Views
Monitoring Agents
Resources